Marley MD Everest
When SPX Cooling Technologies engineers began their quest to design a new counterflow cooling tower, they were challenged to reach new heights in cooling performance. Equally important was their mission to create a solution that would greatly simplify and speed factory fabrication, delivery and field assembly. The result is the Marley® MD Everest,™ a cooling tower that has unparalleled customer advantages.
ABH Basin Heater Controls Engineering Data and Specifications
The Marley ABH basin heater package controls the ON and OFF operation of the basin heater device providing freeze protection in the cold water collection basin of a cooling tower. The stand-alone control package includes a main circuit breaker disconnect that feeds a contactor providing power for the heater element or steam solenoid valve.
NC20 Gegenstrom-Spritzfüller
Die verstopfungssichere Spritzfüllung NC20 besteht aus Polypropylenplatten, die ohne Verwendung von Klebstoffen mechanisch zu Kühlmedienblöcken zusammengefügt werden.
VC25 Gegenstrom-Spritzfüller
VC25 clog-resistant splash fill is constructed of polypropylene sheets mechanically assembled without the use of adhesives to form blocks of cooling media.
Broschüre zum DT-Flüssigkeitskühler
Der Marley DT Fluid Cooler ist ein Flüssigkeitskühler mit Saugzug und Gegenstrom. Sein geschlossenes Kreislaufdesign hält die Prozessflüssigkeit in einem sauberen geschlossenen Kreislauf. Und er bietet mehr Flexibilität im Trockenbetrieb als Hybridkühler mit Füll-/Spule.
Überlastung des Lüftermotors
Overamping occurs when the amperage drawn by the fan motor exceeds the fan motor nameplate amperage. In other words, more horsepower is required than the recommended maximum for the motor.
Cooling Tower Approach
The simplest function of a cooling tower is to cool water to a desired temperature. For evaporative processes, the difference between the cold water temperature and entering wet bulb temperatures is the approach.
Cooling Tower Range
The range is determined by the water flow rate and heat load at the exchanger in the process. The cooling tower is neither a heat sink nor heat source and thus the heat load is always constant.
