Library: Most Recently Added or Changed
Library, White Papers
Water consumed by cooling towers due to evaporation, drift and blowdown can be a concern.
Basin Heater Control – Steam Injector
Engineering Data, Library
The basin heater system is pre-engineered, UL listed and CSA approved for cooling tower basin freeze protection during system shutdown.
Cube BTC Evap Condenser Engineering Data and Specifications – SGS
Engineering Data, Library
The Cube represents the synergy derived from combining the efforts and strengths of two companies to create better solutions for the refrigeration industry.
Recold M Series Fluid Cooler and Evap Condenser
Brochures, Library
The Recold M Series has proven itself in application after application, including HVAC, refrigeration, and a wide array of industrial processes such as plastics, heat-treating, and air compressor cooling. What's more, we frequently add value by configuring systems for special requirements.
Pipe Tap Requirements (48” — 144” diameter)
Library, Technical Papers
The taps should be located in the longest unobstructed section of straight pipe available and easily accessible, and at positions a minimum of 8-10 pipe diameters from any upstream interference and 4-5 pipe diameters from any downstream interference.
Pipe Tap Requirements (up to 48” diameter)
Library, Technical Papers
These connections should be located on the return pipe to the cooling tower. They may be installed on a horizontal or vertical section of pipe providing an adequate straight run.
Thermal Performance Testing Information
Library, Technical Papers
Most testing done today is conducted using data acquisition systems to measure the temperatures. This discussion assumes this type of system is used.
Recommended Test Parameter Limits as Related to Design
Library, Technical Papers
A test is considered valid if all parties agree that one or more parameters may be outside these limits.
